Online connection: Operation example from editing to marking
For test marking
Select the laser marking system to connect.
Select a file to edit in the "Marking settings" screen.
Edit a marking file.
Laser pumping ON
Start test marking
Shutter open (automatic)
Laser radiation
Save the marking file to the laser marking system.
Turn off the laser pumping.
Disconnect the online connection.
Turn off the key switch of the laser marking system.
Exit Laser Marker NAVI smart.
64
Turn on the key switch of the laser marking system.
Start up Laser Marker NAVI smart.
Select "Online".
ME-LPRF-SM-11
Save the marking file to the laser marking system.
Turn on the RUN mode.
Input a marking trigger.
Turn on TRIGGER IN (X5) of the I/O terminal block
or click "Start marking" button of Laser Marker NAVI
smart.
Turn off the RUN mode.
For RUN mode