Mounting Interface Module - Samsung OfficeServ 7200 Installation Manual

CHAPTER 3. Mounting and Replacing Modules
3.1.3 TEPRI Module
Set jumpers (JP3–JP9) and switches on the TEPRI module as shown in Figure 3.13.
Switch Number
3.2

Mounting Interface Module

Interface modules are mounted in slot 1 to slot 5 of each chassis. Table 3.7 describes
the slots locations for interface modules. The locations of slot 0 to slot 5 are shown in
section 1. Chassis Configuration of this chapter.
Page 3-10
Function
1 T1/E1
2 PRI/T1/E1
3 NFAS24B/NFAS 23B+D
4 Network/User
5 AFT/Normal
6 Not Used
7 Not Used
8 Card ID
Figure 3.13 Switch and Jumper Settings on the TEPRI Module
OfficeServ 7200 Installation Guide
ON OFF PRI (EU)
T1 E1 Off
PRI T1/E1 On
Off
N/W User Off
Off
Off
Off
On On
© Samsung Business Communications