CHAPTER 2. Installing Chassis
2.
Drill holes where the screw-holes are marked. The depth of the hole should be
greater than 35 mm and the diameter should be about 5.5 mm so that the plas-
tic anchor can be easily inserted (Fig. 2.8).
3.
Using a hammer, insert the plastic anchors into the holes (Fig. 2.9).
4.
Place the wall bracket against the wall, insert a cross-head screw into each of
the plastic anchors and tighten (Fig. 2.10).
Page 2-6
Figure 2.8 Wall Installation (2)
Figure 2.9 Wall Installation (3)
Figure 2.10 Wall Installation (4)
OfficeServ 7200 Installation Guide
© Samsung Business Communications