Installing On A Wall; Required Items; Procedure; Figure 2.7 Wall Installation (1) - Samsung OfficeServ 7200 Installation Manual

OfficeServ 7200 Installation Guide
4

Installing on a Wall

This section describes how to install the OfficeServ 7200 chassis on a wall.
4.1

Required Items

A mid-sized cross screwdriver
An electric drill
A hammer
A wall bracket
Four plastic anchors
Four cross-head screws
Four mount lock screws
4.2

Procedure

The procedure for installing the OfficeServ 7200 chassis on a wall using a wall
bracket is as follows.
1. There are four screw holes on the wall bracket. Mark the four screw-holes where the
wall bracket is to be installed (Fig. 2.7).
© Samsung Business Communications
Figure 2.6 Items Required for Wall Installation

Figure 2.7 Wall Installation (1)

CHAPTER 2. Installing Chassis
Page 2-5