OfficeServ 7200 Installation Guide
Component
5
DC LED
6
Backup socket
2
Mounting Control Modules
This section describes the procedures for setting switches, mounting optional mod-
ules, mounting modules in slots, and connecting the MCP and LCP modules.
2.1
Setting Switches and Mounting Optional Modules
The MCP module features switches used for optimizing the module for user require-
ments and the system configuration. The procedure for setting switches and mount-
ing optional modules is as follows:
1.
Set the S2 switch to On and set SW1 to SW4 of the S3 switch to Off (Fig. 3.3).
Set SW6 to SW8 of the S3 switch according to your requirements (see Table 3.3).
© Samsung Business Communications
CHAPTER 3. Mounting and Replacing Modules
Turns on for normal DC power output.
For connecting external battery
S3
Off
Figure 3.3 Switch Setting
Function
S2
On
Page 3-3