Chapter 1 Pre-Installation Information; Installation Site Conditions; Safety Conditions - Samsung OfficeServ 7200 Installation Manual

CHAPTER 1
Pre-Installation Information
This chapter provides a checklist for inspecting the installation site and the ground-
ing and power conditions prior to starting the installation of the OfficeServ 7200
system. It also describes the items included in the OfficeServ 7200 package you re-
ceive.
Note that, although all possible options, interfaces, modules, etc., are described in
this guide, some are country specific and, therefore, only available in the relevant
country. Refer to your reseller or distributor for more information if necessary.
1

Installation Site Conditions

Select a location that satisfies the following conditions for safety, temperature and
humidity:
1.1

Safety Conditions

The OfficeServ 7200 system should not be installed:
- near materials that can cause a fire, such as explosive gas and inflammables
- near equipment that generates electromagnetic waves, such as monitors or copy-
ing machines.
- in aisles or passageways that are populated or used for moving equipment.
The location should be convenient for distributing trunk lines and extension lines,
for connecting power and grounding wires, and for maintenance and repair.
Always maintain cleanliness to prevent dust in the area.
Before installing the system, carefully check items such as the electrical wiring
status, grounding status, voltage and frequency.
© Samsung Business Communications Page 1-1