OfficeServ 7200 Installation Guide
3
Mounting an Interface Module
This section describes how to set the jumpers and switches of an interface module,
how to mount optional modules on an interface module, and how to mount inter-
face modules into slots.
3.1
Setting Switches and Mounting Optional Modules
Some interface modules are equipped with switches/jumpers used for configuring user
requirements, and some have connectors for optional modules (see Tables 3.5 and 3.6):
Interface
Module
WIM
MGI
TEPRI
Interface Module
WIM
MGI
© Samsung Business Communications
LINK1
LINK3
LINK2
Figure 3.8 Connecting MCP Module to LCP Module
Table 3.5 Interface Modules with Jumpers/Switches
Jumpers/Switches
JP1~JP4
Memory backup switch
JP3-JP9
Table 3.6 Interface Modules Accommodating Optional Modules
WIMD (Default)
MGI2D
CHAPTER 3. Mounting and Replacing Modules
Description
Sets whether to use the Ethernet port on the front panel
or the back panel when connecting to the LIM module.
Sets memory backup.
Sets E1, T1/E1/PRI, 24B+D/24B, USER/NETWORK and
17H/13H
Optional Module
Page 3-7