Communications Settings - Canon imageRUNNER 1750 Series Service Manual

Communications Settings

*1 Indicates items that are available only when the optional Super G3 Fax Board-AJ1 (standard
equipped for the imageRUNNER 1750iF/1740iF/1730iF) is attached to the machine.
*2 The setting for [Sharpness] is invalid when all of the conditions below are met.
- [100 × 100 dpi], [150 × 150 dpi], or [200 × 100 dpi] is selected as the resolution.
- [B&W] is selected as the color mode.
- [Text] is selected as the image quality.
To activate [Sharpness], change the settings.
*3 Indicates items that are available only when the Color Send Searchable PDF Kit-E1
(optional for the imageRUNNER 1750/1740/1730) is activated.
Item
Common Settings
TX Settings
Unit Name 24 characters maximum
Data Compression Ratio High Ratio, Normal*, Low Ratio
Retry Times 0 to 5 times; 3 times*
Edit Standard Send Settings Store, Initialize
TX Terminal ID On*
Printing Position: Inside, Outside
Telephone # Mark*1: FAX*, TEL
Gamma Value for Color Send Gamma 1.0, Gamma 1.4, Gamma 1.8*, Gamma 2.2
Jobs
Sharpness*2 7 levels; 4*
Register Favorites Button Register/Edit, Erase
PDF (Compact) Image Quality Image Level in Text/Photo or Photo Mode: Data Size
Priority, Normal*, Image Priority
Image Level in Text Mode: Data Size Priority, Normal*,
Image Priority
PDF (OCR) Orig. Auto Detect. On, Off
Settings*3
Color TX Scan Settings Speed Priority, Image Priority
Default Screen for Send Favorites Buttons, One-touch Buttons, Initial Function
Initialize TX Settings Yes, No
RX Settings
2-Sided Print On, Off*
Receive Reduction On*
RX Reduction: Auto*, Fix. Red.
Reduce %: 97%, 95%, 90%*, 75%
Reduce Direction: Ver. Hor., Vertical Only*
Off
Received Page Footer On, Off*
Gamma Value for YCbCr Gamma 1.0, Gamma 1.4, Gamma 1.8*, Gamma 2.2
Received Jobs
Setting Description
Appendix > List of User Mode > Communications Settings
Item
Fax Settings*1
User Settings
Unit Telephone # 20 digits maximum
Tel Line Type Pulse, Tone*
TX Settings
ECM TX On*, Off
Pause Time 1 to 15 seconds; 2 seconds*
Auto Redial On*
Redial Times: 1 to 10 times; 2 times*
Redial Interval: 2 to 99 minutes; 2 minutes*
TX Error Redial: Error and 1st page, All Pages*, Off
Off
Check Dial Tone Before Sending On*, Off
RX Settings
ECM RX On*, Off
RX Restriction On, Off*
Appendix > List of User Mode > Communications Settings
XVII
Setting Description
T-10-8
XVII