Back-Up - Canon imageRUNNER 1750 Series Service Manual

Back-Up

At time of shipment from the factory, all machines are adjusted individually, and adjustment
values are recorded in their respective service labels.
If you have replaced the CCD/CIS unit or the DC controller PCB, or if you have initialized
the RAM, the adjustment values will return to their default settings. If there has been any
change in a service mode item, be sure to update its setting indicated on the service label. As
necessary, make use of the space in the service label (as when recording an item not found
on the label).
- Service Label: behind the rear cover (right))
8
Service Mode > Outline > Service Label
F-8-3
8 Service Mode > Outline > Service Label
Service Label
The item of service kabel is described below.
In this machine, the output of the service label does not support.
FACTORY 1 2
#PRINT> #PRINT NUMERIC>
034 xxx
035 xxx
036 xxx
037 xxx
038 xxx
054 xxx
136 xxx
140 xxx
141 xxx
142 xxx
143 xxx
145 xxx
146 xxx
147 xxx
148 xxx
149 xxx
150 xxx
＃SCAN> READER> ADJUST> ADJ-XY>
ADJ-X xxx
ADJ-Y xxx
ADJ-S xxx
ADJ-Y-DF xxx
STRD-POS xxx
Body No：
3 FACTORY 1 2 3
＃SCAN> READER> ADJUST> ADJ-XY>
ADJ-X-MG xxx
＃SCAN> READER> ADJUST> CCD>
W-PLT-X xxx
W-PLT-Y xxx
W-PLT-Z xxx
50_RG xxx
50_GB xxx
100_RG xxx
100_GB xxx
MTF3-M1 xxx
MTF3-M2 xxx
MTF3-M3 xxx
MTF3-M4 xxx
MTF3-M5 xxx
MTF3-M6 xxx
MTF3-M7 xxx
MTF3-M8 xxx
MTF3-M9 xxx
＃SCAN> READER> ADJUST> PASCAL>
OFST-P-K xxx
＃SCAN> FEEDER> ADJUST>
DOCST xxx
LA-SPEED xxx
DOC-LNGH xxx
F-8-4
8-4
8-4