Removing The Hopper Unit; Preparation; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure

Removing the Hopper Unit

■ Preparation

1) Remove the Rear Cover.(Refer to page 4-24)
2) Remove the Delivery Outer Cover.(Refer to page 4-29)
3) Remove the Left Cover.(Refer to page 4-27)
4) Remove the Toner Cartridge.(Refer to page 4-68)
5) Remove the Waste Toner Container.(Refer to page 4-67)
6) Remove the Drum Unit.(Refer to page 4-68)
7) Remove the Developing Assembly.(Refer to page 4-69)
8) Remove the Front Cover.(Refer to page 4-24)
9) Remove the Fixing Assembly.(Refer to page 4-79)
10) Remove the Right Front Cover.(Refer to page 4-25)
11) Remove the Right Inner Cover.(Refer to page 4-30)
12) Remove the Left Inner Cover.(Refer to page 4-29)
13) Remove the Inner Rear Cover.(Refer to page 4-24)
14) Remove the Delivery Inner Cover.(Refer to page 4-29)
15) Remove the HVT PCB.(Refer to page 4-60)
16) Remove the Laser Scanner Unit.(Refer to page 4-63)

■ Procedure

● Disassembling Procedure
1) Remove the High Voltage Main Guide [1].
• 1 Boss [2]
• 6 Hooks [3]
[3]
[1]
4 Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure
[2]
[3]
F-4-147
2) Remove the Reverse Tray [1].
• 3 Hooks [2]
[2]
3) Remove the High Voltage Upper Guide [1].
• 1 Boss [2]
• 4 Hooks [3]
[2]
[3]
[1]
[3]
[3]
[3]
4-75
[2]
[1]
F-4-148
[1]
F-4-149
4-75