Removing The Separation Static Eliminator; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the Separation Static Eliminator > Procedure

Removing the Separation Static Eliminator

■ Procedure

● Disassembling Procedure
CAUTION:
Be sure not to touch the surface of the Transfer Roller when disassembling/assembling.
1) Open the Right Door Unit [1], and remove the Separation Static Eliminator [2].
[2]
4 Disassembly/Assembly > Image Formation System > Removing the Separation Static Eliminator > Procedure
F-4-136
[1]
F-4-137
● Assembling Procedure
1) Install the Separation Static Eliminator [3] by fitting the 3 protrusions [1] of the Transfer Unit
into the grooves [2] of the Separation Static Eliminator.
[1]
[2] [3]
CAUTION:
Be sure to hook the claw [1] of the grip on the protrusion [2] of the Transfer Unit when
assembling.
[1] [2]
2) Close the Right Door Unit.
4-72
[2]
F-4-138
[2]
[1]
F-4-139
4-72