Removing The Transfer Roller; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the Transfer Roller > Procedure

Removing the Transfer Roller

■ Procedure

● Disassembling Procedure
CAUTION:
Be sure not to touch the surface of the Transfer Roller when disassembling/assembling.
1) Open the Right Door Unit [1], hold the grips [2] at the front and rear, and then remove the
Transfer Roller [3].
[1]
4 Disassembly/Assembly > Image Formation System > Removing the Transfer Roller > Procedure
F-4-133
[2] [3]
F-4-134
● Assembling Procedure
1) Install the Transfer Roller [3] by fitting the protrusion [1] of the Transfer Roller Holder into
the hole [2] of the Transfer Unit.
[3]
2) Close the Right Door Unit.
4-71
[1]
[2]
F-4-135
4-71