Details Of System Numeric - Canon imageRUNNER 1750 Series Service Manual

● SW09
List of Functions
Bit Function
0 PS > Display/hide data protocol menu
1 Long length setting
2 User time setting flag
3 Forced invalidity of uniFLOW
4
5
6
7
Detailed Discussions of Bit 0
You can select whether to disable export of PWD in the address book.
Default: 0
Detailed Discussions of Bit 1
You can select whether to enable long length setting (to extend the range of user-defined
size).
Default: 1
Detailed Discussions of Bit 2
Whether the user made time setting can be checked.
Detailed Discussions of Bit 3
Select whether to set the forced invalidity of uniFLOW.
Default: 0
If turning ON this switch, and turning OFF and then ON the device power while the
uniFLOW function is in active state, the uniFLOW function is forcibly deactivated. In
addition, when this switch is ON, Activate/Deactivate request from the server is ignored.
● SW10
List of Functions
Bit Function
0
1 To set the display of installation NAVI "Setting screen for date and time".
2 To set the display of installation NAVI "Registering user telephone number". Hidden Display
3 To set the display of installation NAVI "Setting screen for user abbreviation". Hidden Display
4 To set the display of installation NAVI "Selection screen on a line type basis". Hidden Display
5 To set the display of installation NAVI "Selection screen for reception mode". Hidden Display
6 To set the display of installation NAVI "Setting screen for IP address".
7
8
Service Mode > Details of Service Mode > #SYSTEM > Details of System Numeric
1 0
Displayed Hide
ON OFF
Set Not set
ON OFF
- -
- -
- -
- -
T-8-49
1 0
- -
Hidden Display
Hidden Display
- -
T-8-50
8 Service Mode > Details of Service Mode > #SYSTEM > Details of System Numeric
Detailed Discussions of Bit 1
When "1" is set, "Setting screen for date and time" of the installation NAVI can be hidden.
Detailed Discussions of Bit 2
When "1" is set, "Registering user telephone number" of the installation NAVI can be hidden.
Detailed Discussions of Bit 3
When "1" is set, "Setting screen for user abbreviation" of the installation NAVI can be hidden.
Detailed Discussions of Bit 4
When "1" is set, "Selection screen on a line type basis" of the installation NAVI can be hidden.
Detailed Discussions of Bit 5
When "1" is set, "Selection screen for reception mode" of the installation NAVI can be hidden.
Detailed Discussions of Bit 6
When "1" is set, "Setting screen for IP address" of the installation NAVI can be hidden.

■ Details of System Numeric

● 20: Display setting of installation NAVI (Other settings)
When "1" is set, "Other settings" of the installation NAVI can be hidden.
Default: 0
● 39: Change of default of LDAP advanced search condition
Change of the default of the LDAP advanced search condition can be set.
0: Includes 1: Not include 2: Equivalent
the next the next to the next
● 41: PS mode 1(8bit)
The PS mode 1 (8bit) can be set.
● 42: ePS mode 1(8bit)
The PS mde 2 (8bit) can be set.
● 57: Setting of paper size group
A paper size group can be set.
1: AB (PAPER_SIZE_GROUP_AB)
2: A (PAPER_SIZE_GROUP_A)
3: INCH (PAPER_SIZE_GROUP_INCH)
4: AB/INCH (PAPER_SIZE_GROUP_AB_INCH)
Initialization takes place when the following service mode is executed:
(CLEAR>ALL, TYPE, SERVICE DATA, TEL & USER DATA)
8-41
3: Not equivalent 4: Starts with 5: Finishes
to the next the next with the next
8-41