Toro Groundsmaster 3200 Series Installation Instructions Manual page 8

Installing the Corner Pads
Remove the backing film and install the corner pads
as shown in Figure 21.
Figure 21
1. Corner pads (PSA)
Installing the ROPS Plugs
Place the ROPS plugs into the ROPS tubes
22).
Figure 22
1. ROPS plugs
2. ROPS tubes
g330727
(Figure
g330696
3. Plugs (positioned in the
tube)
3
Installing the Upper-Frame
Components
Parts needed for this procedure:
2 Rear-pillar pad
1 Left door-side pad
1 Right door-side pad
1 Upper-ceiling pad
1 Lower-ceiling pad
2 Mount-panel pad
1 Left rear-pillar cover
1 Right rear-pillar cover
1
Left sound-dampening panel
1 Right sound-dampening panel
1 Left outer-pillar pad
1 Right outer-pillar pad
Installing the Side-Panel Pads
1. Remove the cab rear-side covers
and Figure 24).
Note:
Retain the bolts.
Rear-side covers
8
(Figure 23
Figure 23
g330651