1. Steering cover
Installing the Floor Pads
1.
Remove the rubber floor mat
1. Rubber floor mat
2.
Remove the backing film, and install the center
and corner floor pads to the platform floor
(Figure
11).
Figure 9
2. Bolt
(Figure
10).
Figure 10
g330592
1. Corner floor pad (PSA)
Removing the Seat
Perform the following steps to remove the seat from
the seat base:
1.
Remove the nuts that secures the seat to the
seat base
Note:
Retain the nuts.
g331308
1. Nut
2.
Remove any wire-harness connections from the
seat.
3.
Remove the seat from the seat base.
•
Note the position of the mounted seat to
the seat base, as the seat needs to be
re-installed in the same holes.
•
To install the seat pads (steps
have an assistant hold the seat above the
seat base.
4
Figure 11
2. Center floor pad (PSA)
(Figure
12).
Figure 12
g330624
g299346
1
through 3),