Table of Contents
Advertisement
4
3
G005672
1. Bag
2. Bagger frame
6. Lower the bagger top onto the bags.
Clearing Obstructions from
the Bagger
1. Park the machine on a level surface and disengage the
blade control switch.
2. Move the motion control levers outward to the neutral
lock position, stop the engine, remove the key, set the
parking brake and wait for all moving parts to stop
before leaving the operating position.
3. Check the grass bags and empty them if they are full.
4. Separate the discharge tube and chute.
5. Remove the discharge tube and chute from the bagger
top and mower deck. Using a stick or similar object,
carefully remove and clear the obstruction from the
mower, discharge tube, chute, and the bagger top.
6. After you remove the obstruction, install the complete
bagger system and resume operation.
1
2
Figure 30
3. Retaining bracket
4. Bag-frame hook
Removing the Bagger
CAUTION
Failing to remove the front bagger weights
and operating the machine without the bagger
attachment may cause an unstable condition which
could result in a loss of control.
• Always remove the front weights when removing
the bagger attachment.
• If you remove the bagger attachment, remove
the front weights.
The bagger can be removed by repeating the Setup sections
from all installed bagger related kits in reverse order. If
weights are installed, always remove the front bagger weights
when removing the bagger attachments.
Note: It is only necessary to remove the cutoff baffle when
installing a mulching kit.
Using the Draw Bar
The bagger support bracket has a draw bar feature that can
be used for towing.
•
Read and understand all the operating instructions of the
machine.
•
When turning, slow down and observe the clearance.
•
Make wide turns and keep towed equipment clear of the
towing vehicle.
•
The maximum draw bar pull is 36 kg (80 lb).
•
Excessive draw bar pull may cause hydrostatic
transmission failure.
g033033
1. Bagger-support bracket with draw bar
16
1
Figure 31
Advertisement
Table of Contents
