Reducing The Lamp Brightness; Resetting The Image Settings - Canon REALiS WUX4000 User Manual

Reducing the Lamp
Brightness
[Lamp mode]
HDMI
Digital PC
Reducing the lamp brightness reduces
power consumption and cooling fan noise.
You can also enable or disable this mode
with the LAMP button on the remote con-
trol.
Lamp mode
Normal
Projects an image at the normal
brightness level.
Quiet
Reduces the lamp brightness and
cooling fan noise.
Press the OK button to accept your setting
and then press the MENU button.
• [Normal] is the factory default.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
Resetting the Image Set-
tings
[Reset]
Component
Analog PC
You can reset the current image settings to
the default settings. If reset is performed
when user setting 1 - 5 is selected for
[Image mode], the settings are returned to
the settings that were saved in [User set-
ting 1 - 5].
Image adjustment
Press the OK button to accept your setting
and then press the MENU button.
• Only the setting for the combination of
97
Selecting an Image Quality
HDMI
Digital PC
Reset
OK
Resets the image settings.
Cancel
Cancels resetting of the image
settings.
input signal and image mode for the cur-
rent projection is reset.
Component
Analog PC
Image adjustment