Connecting To Analog Video Output Terminal (Analog Connection) - Canon REALiS WUX4000 User Manual

■Connecting to Analog Video Output Terminal (Analog Connection)

Component cable (Input signal type: [Component] – P48)
A component video signal from the AV equipment can be inputted into the projector by
connecting the component cable to the ANALOG PC / COMPONENT IN terminal of the
projector.
Use a commercially available component cable that fits the terminal type of the AV equip-
ment to create a relay connection.
AV equipment
RCA component
terminal
D terminal
Video output ter-
minal
When inputting corresponding audio signal
RCA terminal
Mini jack
AUDIO OUT terminal
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will
reduce the audio volume.
RCA plug - RCA plug compo-
nent cable (not included)
D terminal plug - RCA plug
component convert cable
(not included)
Audio cable (not included)
Connecting the Projector
Component cable
(not included)
43
Projector
To ANALOG PC / COMPONENT
IN
To AUDIO IN