Image Adjustment Menu - Canon REALiS WUX4000 User Manual

Menu Configuration

Image Adjustment Menu

Image mode COMMON
Standard *
Photo/sRGB
User 1 - 5 (as creating
profile)
Digital PC / Analog PC
Presentation
VividPhoto
Component /
Dynamic
Video
Cinema
Create Profile P89
Baseline Image P89
Mode (when user
memory is selected)
Brightness P90
Contrast P90
Sharpness P91
Gamma P91
Color adjustment P92
Color level
Color balance
Color temperature
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
P88 Advanced adjustment
P88
HDMI P88
Lamp mode
Reset
*: Factory default settings (after reset)
Factory default settings for *1, *2 and *3 are set accord-
ing to the following conditions.
*1: • For Analog PC, Digital PC or HDMI (when [HDMI
*2: • For HDMI (when [HDMI In] is [Auto]), the factory
*3: • For HDMI (when [HDMI In] is [Computer]), Digi-
186
Ambient light Off *
Adjust
Type
Level
Return
Noise reduction *2 Component /
Off
Weak
Middle
Strong
Dynamic gamma Off *1
Weak *2
Middle
Strong
Mem. color correct *3 Off
L
M
H
6-axis color adjust Off *
Adjust
Reset
Fine-Tune Gamma P96
Return
Normal *
Quiet
OK / Cancel
In] is [Computer]), the factory default is [Off].
• For Component, and HDMI (when [HDMI In] is
[Auto]), the factory default is [On].
default is [Off].
• For Component, the factory default is [Weak].
tal PC or Analog PC, if any image mode is used
except [VividPhoto], the factory default is [Off].
If [VividPhoto] is used, the factory default is
[Middle].
• For HDMI (when [HDMI In] is [Auto]) or Compo-
nent, the factory default is [Weak], regardless of
the image mode.
P93
Tungsten
Fluorescent
Fluores-
cent H
L
M
H
HDMI P94
P94
P95
P95
Hue / Saturation /
Brightness
P97
P97