Main Unit And Remote Control Channel Settings - Canon REALiS WUX4000 User Manual

Setting Various Functions
Main Unit and Remote
Control Channel Settings
[Remote control]
HDMI
Digital PC
When using multiple projectors at the
same time (maximum 4), you can assign a
different channel to each remote control so
that each operates independently.
Remote control
Select the main unit channel.
Ch1
Select the remote control
Ch2
channel to use with this
Ch3
projector.
Ch4
Independent
Remote controls set to any
channel can be used.
Press the OK button to accept your setting
and then press the MENU button.
• The factory default is [Independent] for
both projector and remote control.
• After changing the channel on the menu,
be sure to change the channel of the
remote control too.
Selecting a Channel on the Remote control
You can change the channel on the
Component
remote control as follows.
Analog PC
System settings
100
Ch1 Press and hold the OK button
and [ ] button at the same time
for 3 seconds.
Ch2 Press and hold the OK button
and [ ] button at the same time
for 3 seconds.
Ch3 Press and hold the OK button
and [ ] button at the same time
for 3 seconds.
Ch4 Press and hold the OK button
and [ ] button at the same time
for 3 seconds.
Inde- Press and hold the OK button
pendent and MENU button at the same
time for 3 seconds.