Connecting To Dvi Monitor Output Terminal (Digital Connection) - Canon REALiS WUX4000 User Manual

Connecting the Projector
BNC cable (Input signal type: [Analog PC] – P48)
Computer
Monitor output ter-
minal
(mini D-sub 15-pin)
AUDIO OUT terminal
(AUDIO OUT)
• A signal with a dot clock of 162 MHz or higher cannot be projected.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
will reduce the audio volume.

■Connecting to DVI Monitor Output Terminal (Digital Connection)

DVI cable (Input signal type: [DVI-D] (Digital PC) – P48)
Computer
Monitor output
terminal
(DVI terminal)
AUDIO OUT terminal
(AUDIO OUT)
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor will
reduce the audio volume.
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not in-
cluded)
BNC cable (not included)
When inputting corresponding sound.
Audio cable (not included)
DVI-D cable (not included)
When inputting corresponding sound
Audio cable (not included)
Mini D-sub 15-pin -
BNC terminal con-
verter cable (not in-
cluded)
To DVI-D IN
40
Projector
To ANALOG PC / COM-
PONENT IN
To AUDIO IN
Projector
To AUDIO IN