Adjusting The Image Position - Canon REALiS WUX4000 User Manual

Adjusting the Image

Adjusting the Image Position

To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the
remote control or the LENS button on the projector. This function is referred to as "lens
shift" because the position of the projected image is changed by moving the lens posi-
tion. (P126)
• The available range for lens shift (percentage of movement relative to the screen size) var-
ies depending on the lens unit which is used. (P127)
Standard Zoom Lens (RS-IL01ST): Down 15% - Up 55%, Left 10% - Right 10%
Long Zoom Lens (RS-IL02LZ): Down 15% - Up 55%, Left 10% - Right 10%
Short Fixed Lens (RS-IL03WF): Down 5% - Up 5%, Left 2% - Right 2%
• There are areas where each lens is unable to move. With the Standard Zoom Lens and the
Long Zoom Lens, the areas are at the top left and top edges. With the Short Fixed Lens,
the areas are at the four corners. (P127)
1
Press either the LENS-SHIFT button on the remote control or the LENS button on the
projector 3 times in order to display the window shown on the lower right.
Remote control
2
Press the pointer buttons to adjust.
Remote control
3
When the desired position is reached, press the OK button.
Projector
Push three times
Projector
60
Screen