Canon REALiS WUX4000 User Manual page 53

4
Use the [ ] / [ ] buttons to select the desired contents.
Remote control
16:10
Select this when you use a screen with aspect ratio of
16:10. Also, select this when you project an image on
a wall. You can correct keystone distortion with this
mode.
16:9
Select this when you use a screen with aspect ratio of
16:9. You can correct keystone distortion with this
mode.
4:3
Select this when you use a screen with aspect ratio of
4:3. You can correct keystone distortion with this
mode.
16:9 D. image shift
Select this when you use a screen with aspect ratio of
16:9. You cannot correct keystone distortion in this
mode, but you can move the image up or down with
images being projected horizontally.
For the details on how to move the image, refer to
page 54.
4:3 D. image shift
Select this when you use a screen with aspect ratio of 4:3. This is also recommended
when projecting visual software with an aspect ratio of 4:3.
You cannot perform the keystone adjustment in this mode; however, you can move the
image to the left or right while projecting the image horizontally.
For the details on how to move the image, refer to page 55.
5
Press the OK button to confirm your setting and then press the MENU button.
Projector
53
Adjusting the Image
16:10 screen
16:9 screen
4:3 screen