Side Control - Canon REALiS WUX4000 User Manual

Part Names

Side Control

(1) LED indicators (P33)
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to "LED Indicator Displays" (P33).
• POWER ON (green): Lights up or flashes when the power is on.
• STAND BY (red)
• WARNING (red)
• LAMP (orange)
• TEMP (red)
(7)
(2) POWER button (P45, P66)
Turns the projector on or off.
(3) MENU button (P74)
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(P59), zoom (image size) adjustment
(P58), or lens shift (image position)
adjustment (P60). To adjust, use the
[ ] / [ ] or the [ ] / [ ] buttons.
: Lights up or flashes during standby or when the projector is
shut down.
: Lights up or flashes when an error occurs.
: Flashes when the time for replacing the lamp is near. Also lights
up together with the [WARNING] indicator (constantly lit) when
a lamp malfunction or lamp cover malfunction has occurred.
: Lights up together with the [WARNING] indicator (constantly lit)
when a temperature error has occurred. Flashes when the tem-
perature inside the projector is high.
(1)
(5)
(6)
32
(4)
(3)
(2)
(5) INPUT button (P49)
Switches the input signal.
(6) Pointer / VOL buttons (P75)
Adjust the sound volume.
[ ] button: Decreases the volume.
[ ] button: Increases the volume.
Selects the upper, lower, left or right
item in the menu.
(7) OK button (P76)
Determines the item selected from the
menu.