Selecting Screen Aspect And Aspect; Selecting Screen Aspect - Canon REALiS WUX4000 User Manual

Adjusting the Image

Selecting Screen Aspect and Aspect

Select an optimum aspect ratio of the projected image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection to make best use of the screen size.
[Screen aspect]
[Aspect]
You may need to change the setting depending on the resolution of the computer. If the
image is not projected with the desired aspect ratio, see "Relationship between Aspect
and Screen Aspect" on page 173.

■Selecting Screen Aspect

Select the correct aspect ratio for the screen which is used.
Perform the following steps to select the aspect ratio of the projected image.
1
Press the MENU button to display a menu window.
Remote control
2
Use the [ ] / [ ] buttons to select the [Display settings] tab.
Remote control
3
Select [Screen aspect] with the [ ] / [ ], and then press the OK button.
Remote control
Select the same screen aspect ratio as the screen you are using.
In general, select [Auto].
Projector
Projector
Projector
52