Table of Contents
Advertisement
Available languages
Available languages
4. LOADING AND INSTALLATION
4.1
Precautions when handling
The following is an explanation of handling precautions of the module.
(1) Because the case of the module is made of resin, be careful not to
drop it or expose it to strong impact.
4.2
Installation environment
Never install the module in the following environments:
(1) Locations where the ambient temperature is outside the range of 0
to 55°C.
(2) Locations where the ambient humidity is outside the range of 10 to
90%RH.
(3) Locations where dew condensation takes place due to sudden
temperature changes.
(4) Locations where there are corrosive and/or combustible gasses.
(5) Locations where there is a high level of conductive power (such as
dust and iron filings, oil mist, salt, and organic solvents).
(6) Locations exposed to the direct rays of the sun.
(7) Locations where strong power and magnetic fields are generated.
(8) Locations where vibration and shock are directly transmitted to the
main module.
8
Advertisement
Table of Contents
