Mitsubishi Electric 800 Series Installation Manualline page 8

INSTALLATION AND INSTRUCTIONS
l E: The output specification for monitoring and the rated frequency are shown for the standard model and the
communication protocol group is shown for the Ethernet model and the safety communication model. The control logic
is fixed to the source logic for the safety communication model.
Symbol Monitoring/protocol specifications
-1 Pulse (terminal FM)
-4 Voltage (terminal AM)
-5 Voltage (terminal AM)
PA Protocol group A (CC-Link IE TSN, CC-Link IE Field Network
Basic, MODBUS/TCP, EtherNet/IP, and BACnet/IP)
PB Protocol group B (CC-Link IE TSN, CC-Link IE Field Network
Basic, MODBUS/TCP, PROFINET)
*1
The initial status of the control logic differs depending on the inverter model.
Sink logic for the models indicated with the rated capacity (kW)
Source logic for the models indicated with the rated current (A).
l F: Availability of circuit board coating / plated conductors is shown.
Symbol
Circuit board coating
None Without coating
-60 With coating
With coating
*2
-06
*1
Conforming to IEC 60721-3-3 3C2
*2
Applicable for the FR-E820-0470(11K) or higher, and the FR-E840-0230(11K) or higher.
CAUTION
l In this Instruction Manual, the inverter model name consists of the inverter rated current and the applicable motor capacity.
(Example) FR-E820-0008(0.1K)
1.2 Accessory
l Fan cover fixing screws
These screws are necessary for compliance with the EU Directives. For details, refer to the document enclosed with the
product.
Capacity
FR-E820-0080(1.5K) to FR-E820-0330(7.5K),
FR-E840-0016(0.4K) to FR-E840-0170(7.5K),
FR-E820S-0080(1.5K) or higher
FR-E820-0470(11K), FR-E820-0600(15K),
FR-E840-0230(11K), FR-E840-0300(15K)
FR-E820-0760(18.5K) or higher, FR-E840-0380(18.5K) or higher
1.3 How to read the SERIAL number
Rating plate example
Symbol Year Month
SERIAL
2
*1
The SERIAL consists of two symbols, three characters indicating the produc-
tion year and month, and six characters indicating the control number.
The last two digits of the production year are indicated as the Year, and the
Control number
Month is indicated by 1 to 9, X (October), Y (November), or Z (December).
Rated frequency
(initial setting)
60 Hz
50 Hz
60 Hz
60 Hz
50 Hz
Plated conductor
Without plated conductors
Without plated conductors
With plated conductors
Screw size (mm)
M3 × 35
M3 × 35
M3 × 50
Control logic
Input signal Safety stop
(initial status)
Sink logic
Source logic
Sink logic
Source logic
Sink logic
Sink logic/Source
*1
logic
Quantity
1
2
2
signal
(fixed)