Mitsubishi Electric 800 Series Installation Manualline page 60

PARAMETER LIST
Para-
Name
meter
C44
PID display gain
*5
coefficient
(935)
C45
PID display gain
*5
analog value
(935)
PR.CL
Parameter clear
ALLC
All parameter clear
ER.CL
Fault history clear
Initial value change
PR.CH
list
PM parameter
PM
initialization
Automatic parameter
AUTO
setting
Group parameter
PR.MD
setting
*1
Gr.1 and Gr.2 are the parameter initial value groups.
*2
Differs depending on the capacity. (see Instruction Manual
(Function) for more details).
*3
The set value is read/written in 2-word (32-bit) units when the
PLC function is used for parameter reading/writing.
*4
The setting is available only when a Vector control compatible
option is installed.
*5
On the LCD operation panel used as the command source, the
parameter number in parentheses appears instead of that
starting with the letter C.
*6
For the Ethernet model and the safety communication model,
the setting is available only when the FR-A8AY is installed.
*7
Available when the PLC function is enabled. (Pr.313 to Pr.315
are always available for settings in the Ethernet model and the
safety communication model.)
*8
For the standard model, the setting is available only when
a communication option is installed.
54
Initial
Setting Range
*1
Value
0 to 500, 9999 9999
100%
0% to 300%
0
(0), 1
(0), 1 0
0
(0), 1
0
—
0
0
—
—
(0), 1, 2 0