Mitsubishi Electric 800 Series Installation Manualline page 6

Maintenance, inspection and parts replacement
l Do not carry out a megger (insulation resistance) test on the control circuit of the inverter. It will cause a failure.
Disposing of the inverter
l Treat as industrial waste.
General instructions
Many of the diagrams and drawings in instruction manuals show the inverter without a cover, or partially open. Never run the inverter in
this status. Always replace the cover and follow instruction manuals when operating the inverter. For more details on the PM motor,
refer to the Instruction Manual of the PM motor.
CAUTION
CAUTION