Mitsubishi Electric 800 Series Installation Manualline page 45

Basic operation (Ethernet model and safety communication model)
Operation mode switchover/frequency setting
Network operation mode (at power-ON)
First screen (Output frequency monitoring)*2
*1
For the details of operation modes, refer to Instruction Manual (Function).
*2
The monitor item can be changed. refer to Instruction Manual (Function).
*3
Not displayed for the 575 V class.
*4
For the details of the fault history, refer to the Instruction Manual (Maintenance).
*1
PU operation mode *1
Blinking
Change the setting.
PU operation mode
The present setting is
All parameter clear
Parameter clear
Group parameter setting
(Example)
Blinking
Faults record 1
The last ten fault records can be displayed.
When the fault history is empty, only the fault number is displayed.
Second screen
(Output current monitoring)*2
Change the setting.
displayed.
Faults history clear
Automatic parameter setting
(Example)
*4
Faults record 2
BASIC OPERATION
*1
PU JOG operation mode
Frequency setting written and completed!
Third screen
(Output voltage monitoring)*2
Parameter write completed!
Initial value change list
PM initialization*3
(Example)
Blinking
*4
Faults record 10
Blinking
Blinking
*4
39