Table of Contents
Advertisement
Extending the Rear Side Board
1. Loosen the screws at the top and bottom of the board panel alternately.
2. Holding the screws, pull out the board. (Refer to section 2-8.)
3. Set the dip switches of the extension board according to the board extended.
4. Push in the extension board (EX-670) according to the guide rail.
5. Insert the board removed into the extension board.
FVS-1000 MMP1
Extension board
(EX-670)
Card board
Dip switches
2-9. Using the Extension Board
2-39
Advertisement
Table of Contents
