Sony FVS-1000 Maintenance Manual page 46

2-3. Location of Main Parts
Number Sensor
!.
OPS H direction glass sensor
@/
OPS V direction glass sensor
@-
T side PAD roller position sensor
@=
T side PT roller position sensor
@[
T side PAD TYPE SW
@]
Integral ball discrimination sensor
@\
Lamp SW
@;
STANDBY SW
@'
SV RESET SW
@,
Breaker
@.
Rear internal lock SW
#/
Lens load SW
#-
Camera shifter position sensor
2-12
Function
This sensor detects the glass position in the horizontal
direction of the OPS.
This sensor detects the glass position in the vertical
direction of the OPS.
This sensor detects load and unload position of the T side
PAD roller.
This sensor detects load and unload position of the T side
PT roller.
This switch discriminates between 16 mm and 35 mm of
the T side PAD roller and detects whether the S side PAD
roller is installed or not.
This sensor discriminates among 16 mm, 35 mm and 8P
of the integral ball.
Emergency switch to turn off the lamp
Switch for STANDBY
Switch for servo reset
Switch to turn on or off the system
When replacing the lens, the power is turned off by
opening the rear door.
When replacing the lens, the lens can be moved.
This sensor detects whether the camera shifter is pulled
out or not.
FVS-1000 MMP1