Sony FVS-1000 Maintenance Manual page 66

2-7. Removing/Installing the Cabinet and FTP Panel
Removing/Installing the FTP Panel F
Removal
1. Rotate the knob assembly in the counterclockwise direction and remove it. (Both S, T)
(Refer to ''Removing/Installing the FTP Panel A".)
2. Remove the four screws, and remove the core stopper (B). (Both S, T)
(Refer to ''Removing/Installing the FTP Panel A".)
3. Remove the protector assembly. (Both S, T) (Refer to ''Removing/Installing the FTP Panel A".)
4. Remove the two screws, and remove the film guard assembly. (Both S, T)
5. Remove the guard stopper assembly. (Both S, T)
6. Remove the OPS cover.
7. Remove the gate base assembly.
8. Remove the PAD assembly. (Both S,T)
9. Remove the four PAD positioning shafts, and remove the PAD receiving table SA assembly, PAD
receiving table SB assembly, PAD receiving table TA assembly, and PAD receiving table TB
assembly.
Pad SA retainer assembly
Pad positioning shaft
Pad SB retainer
assembly
Pad positioning shaft
Pad positioning shaft
2-32
Pad TA retainer
assembly
Pad positioning shaft
Pad TB retainer assembly
FVS-1000 MMP1