Table of Contents
Advertisement
12. Installation of the lenses
1. Combine the supplied 35 mm conversion lens and the master zoom lens.
(1) Remove the protection cap of them.
(2) Insert the pin of 35 mm conversion lens to the notch of the master zoom lens, then turn the ring
until they are locked.
(3) Connect the cable of 35 mm conversion lens with the connector of the master zoom lens.
35 mm conversion lens
Ring
Pin
Cable
Master zoom lens
2. Remove the screw a (B3 x 6), then loosen the screw b (B3 x 6), and then open the cover on the rear
door of the FVS-1000 in the direction of arrow.
3. Push the "LENS EXCHANGE" button.
4. Confirm that the lamp changes from flashing to lighting, then open the rear door.
LENS EXCHANGE
button
Screw b
(B3 x 6)
Cover
FVS-1000 MMP1
Protection cap
Connector
Screw a
(B3 x 6)
Notch
Rear door
1-10. Installation Procedure
1-21
Advertisement
Table of Contents
