Table of Contents
Advertisement
T side:
. CN5/CN-1748 board (Rear of T tension
regulator assembly)
. CN1/SE-446 board (Front of PT assembly)
4. Removing the PT assembly
Remove the four screws, and remove the PT
assembly.
Installation
5. Installing the PT assembly
Install the PT assembly using the four screws.
6. Connecting the connector
Connect the connector removed in step 3.
7. Installing the side panel
Install the side panel removed in step 2.
(Refer to section 2-7-4.)
8. Installing the FTP panel
Install the FTP panel removed in step 1.
(Refer to section 2-7-4.)
FVS-1000 MMP1
http://getMANUAL.com
T side
PT assembly
W5
Screw 5 x 12
W5
Screw 5 x 12
4-3. Replacing the PT Assembly
Rear of T tension regulator assenbly
CN-1748 board
CN5
Front of PT assenbly
SE-446 board
CN1
4-5
Advertisement
Table of Contents
