Sony FVS-1000 Maintenance Manual page 25

8. Installation of the control panel
1. Pull out the hinges in the arrow direction.
2. Tighten the left and right lock screws to fix the hinges.
Lock screw
Hinge
3. Fix the rack angle to the control panel with the supplied four screws (PSW4 x 10).
4. Place the control panel on the hinges and fix with the four screws (B5 x 10) provided. Move the
hinges in the arrow direction and attach them.
5. Connect the connector and the pin jack at the rear side of the control panel, then fix the harnesses
with the harness band.
PSW4 x 10
PSW4 x 10
Rear side
Pin jack Harness band
Connector
FVS-1000 MMP1
http://getMANUAL.com
Hinge
B5 x 8
Rack angle
B5 x 8
Hinge
Lock screw
Control panel
B5 x 8
B5 x 8
Hinge
1-10. Installation Procedure
Rack angle
PSW4 x 10
PSW4 x 10
1-15