Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 87

Adding log markers of GX VideoViewer to GX Works3
Add log markers at the point to check the program operation in GX VideoViewer, and synchronize them with the seek bar in
GX Works3.
Operating procedure
1.
Since the workflow analysis shows that the product No. mismatch signal is involved, add log markers at the part of the
video where the product No. of the workpiece is determined with GX VideoViewer. (Page 61 Checking the video in
the camera (GX VideoViewer))
2.
Synchronize the log markers with the offline monitoring in GX Works3.
[Log Marker]  [Read]
9 OPERATION EXAMPLE
9.1 How to Check the Recording Result
9
86