7
CHECKING RECORDED RECORDING FILES
This chapter describes how to check the recorded recording files.
7.1
Reproducing the Trouble Situation
Check the situation of the error using the offline monitor function.
The offline monitor function can be used to reproduce the situation of the error on the engineering tool by replaying device/
label data, video data, and event history saved in the programmable controller (camera recorder module) on the offline
monitor.
The following describes how to start the offline monitoring.
Operating procedure
1.
Use the recording file read from the programmable controller (camera recorder module) to perform offline monitoring.
[Recording] [Start Offline Monitor] [Recording File]
2.
Select the recording file to open.
7 CHECKING RECORDED RECORDING FILES
59
7.1 Reproducing the Trouble Situation
Select the MELRC file.
Click the [Open] button.