Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 5

System configuration
In this document, the following system configuration is used as an example.
(6)
(5)
Device/software
(1) CPU module
(2) Camera recorder module
(When setting the SD memory card as the save destination of the
recording file, an SD memory card must be inserted to the camera
recorder module.)
(3) Personal computer for setting
(4) ONVIF supported network camera
(5) MELIPC MI3000
(6) GOT
(7) PoE switching hub
*1 The version 1.072A is used in this document.
*2 The version 1.115U is used in this document.
*3 The version 1.245F is used in this document.
*4 The version 1.009K is used in this document.
Refer to the following website to check whether the camera to be used supports ONVIF.
https://www.onvif.org/conformant-products/
(1) (2)
(7)
(4)
*1
GX Works3
*2
GX LogViewer
*3
GT Designer3
*4
GX VideoViewer
*3
GT SoftGOT
(3)
Model
R16CPU
RD81RC96-CA




M1065-L
M5054
MI3321G-W
GT2710-VTBA
GS108PE
IP address
192.168.3.39 (default)
192.168.3.49
192.168.3.100
192.168.3.1
192.168.3.2
192.168.3.30
192.168.3.18 (default)

1 OVERVIEW
1
4