Recording Setting - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

4.3

Recording Setting

This section describes the setting method to use the recording function of the camera recorder module.
The recording function stores the data (device or label) sampled by the CPU module and the video data recorded by the
network camera in the camera recorder module, outputs the data for a saving period to a recording file when a file saving
trigger is satisfied, and saves it to the SD memory card or file server.
Process of saving data
■Saving devices and labels
CPU module

Device/label
area
: Sampling data

A CPU module samples a device and label specified as a sampling target in the buffer area for data sampling.
 A camera recorder module accumulates the device and label sampled in the buffer area for data sampling in the
recording buffer.
 The camera recorder module outputs data for a saving period to a recording file and saves it to a save destination
specified in the recording setting when a file saving trigger is satisfied.
4 PROGRAMMABLE CONTROLLER SETTINGS
33
4.3 Recording Setting
Buffer area for data
sampling
Setting 1
Setting 2
Camera recorder module
Recording buffer
Setting 1

Setting 2
SD memory card/file server

Recording file
File saving trigger
Setting 1
Recording file
Setting 2