Entire Process Of Introduction - Mitsubishi Electric MELSEC iQ-R Series Introduction Manual

1.1

Entire Process of Introduction

Follow the steps below to configure and check the operation. For details, refer to Chapter 2 and later in this document.
Network camera setting
Programmable controller setting
Checking the recorded recording file
1 OVERVIEW
5
1.1 Entire Process of Introduction
Preparation
GOT setting
Recording
Operation example
Do preparation such as wiring devices and inserting an SD memory card.
Chapter 2
Configure the settings for connecting the network camera and programmable
controller, and configure the settings for recording and saving videos.
Chapter 3
Configure the settings of the programmable controller to use the recording
function of the camera recorder module.
Chapter 4
Configure the settings on the GOT to sample resource data.
Chapter 5
Execute the program and read the recording file.
Chapter 6
Open the read recording file, and monitor the program operation offline.
Chapter 7
Investigate and analyze the cause of the error by using videos recorded
with cameras, the offline monitor function of GX Works3, data flow analysis,
and GX LogViewer.
Chapter 9