Toro LT-F3000 Installation Instructions Manual page 7

Figure 17
1. Transmission manifold
2. Chassis beam
3. Washer (10 mm)
3. Remove the manifold from the machine
18).
Note:
Discard the manifold.
Figure 18
g342723
g342886
4. Lock washer (10 mm)
5. Capscrew (10 x 25 mm)
(Figure
g342841
4
Installing the Front
Transmission Manifold
Parts needed for this procedure:
1 Front Transmission Manifold
Preparing the New Transmission
Manifold
1. Assemble the T-fitting that you removed
in Removing the Hoses at the Front of the
Transmission Manifold (page 5)
fitting in port-PB of the front transmission
manifold (Figure
1. Straight fitting
(port-PB—front
transmission manifold)
2. Align the T-fitting as shown in
torque it to 34 to 41 N∙m (25 to 30 ft-lb).
7
onto the straight
19).
Figure 19
2. T-fitting
Figure 19
g342850
and