Toro LT-F3000 Installation Instructions Manual page 3

2
Installing the
Differential-Lock Switch
Parts needed for this procedure:
1 Differential-lock switch
Procedure
1. Remove the plug from the panel of the control
console as shown in
1. Plug
2. Lift the 8-pin connector labeled D
S through the hole in the control console
WITCH
(Figure 4).
Figure 3.
Figure 3
L
IFF OCK
g342638
1. 8-pin connector
(labeled D
IFF
S —control console
WITCH
harness)
3. Plug the differential-lock switch into the 8-pin
connector
4. Align the lock switch as shown in
insert it into the control-console hole.
Note:
Ensure that the switch snaps securely
into the control console.
1. Right side of the machine
3
Figure 4
2. Differential-lock switch
L
OCK
(Figure 4).
Figure 5
g342637
Figure 5 and
g342636