Toro LT-F3000 Installation Instructions Manual page 13

Installing the Pressure Hose
1. Assemble the 90°fitting of the differential
pressure hose onto the straight fitting in port-MB
fitting of the traction pump
Figure 35
1. Straight fitting (port-MB
fitting—traction pump)
2. Route the differential pressure hose to the
traction manifold.
3. Assemble the straight fitting of the differential
pressure hose onto straight fitting in port-B1 of
the front traction manifold
37).
Figure 36
(Figure 35).
g343558
2. Differential pressure hose
(90° fitting)
(Figure 36 and Figure
g342834
1. Straight fitting
(port-B1—front traction
manifold)
4. Torque the swivel nuts of the differential pressure
hose fittings to 32 N∙m (24 ft-lb).
Installing the Brake Pressure
Transducer
Machines with the Optional Road Light Kit
1. Route the 3-pin connector labeled
PRESSURE SENSOR
front-traction manifold
1. Front-traction manifold
2. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
2. Remove the hex-socket plug from port-PS of the
front traction manifold
13
Figure 37
2. Differential pressure hose
(straight fitting)
BRAKE
and wiring toward
(Figure 38).
Figure 38
3. Front of the machine
)
(Figure 39).
g343557
g344918