Toro LT-F3000 Installation Instructions Manual page 10

Figure 24
1. Front of the machine
2. Left traction-motor hose
(marked FAL)
2. Torque the swivel nut of the 90° return hose
fitting to 45 N∙m (34 ft-lb).
3. Assemble the hydraulic-return hose (marked
DC) onto the straight fitting in port-DC of the
front transmission manifold
Figure 25
1. Front of the machine
2. Straight fitting
(port-DC—front
transmission manifold)
4. Torque the swivel nut of the 90° return hose
fitting to 16.5 N∙m (13 ft-lb).
5. Assemble the 90° fitting onto the straight fitting
at port-A of the front transmission manifold
(Figure 26).
g342986
3. Straight fitting
(port-FAL—front
transmission manifold)
(Figure 25).
g343020
3. Hydraulic-return hose
(marked DC)
1. Hydraulic-pump hose
(marked A)
2. 90°fitting
6. Torque the 90° fitting to 160 N∙m (118 ft-lb).
7. Assemble the hydraulic-pump hose (marked A)
onto the 90° fitting
8. Torque the swivel nut of the 90° pump hose
fitting to 74.5 N∙m (55 ft-lb).
Installing the Hoses at the Front of
the Front Transmission Manifold
1. Assemble the right traction-motor hose (marked
FAR) onto the straight fitting in port-FAR of the
front transmission manifold
1. Straight fitting
(port-FAR—front
transmission manifold)
2. Right traction-motor hose
(marked FAR)
10
Figure 26
3. Straight fitting (port-A)
4. Front of the machine
(Figure 26).
(Figure 27).
Figure 27
3. Front of the machine
g343023
g343019