Toro Workman GTX Operator's Manual page 16

Parking-Brake Lever
The parking-brake lever is located on the control
panel (Figure 6).
Whenever you shut off the machine, engage the
parking brake to prevent the machine from accidental
moving. If the machine is parked on a steep grade,
make sure that you engage the parking brake.
To engage the parking brake, pull the parking-brake
lever toward you (Figure
1. Parking-brake lever
To disengage the parking brake, push down the
button on top of the parking brake lever, pull the
parking-brake lever toward you to release pressure,
and then push the parking-brake lever forward
8).
1. Parking-brake lever and button
7).
Figure 7
Figure 8
Direction Selector
The direction selector is located to the left of the
parking-brake lever. The direction selector has 3
positions: F
6).
Note:
The machine can be on in any of the 3
positions, but only moves in the F
R positions.
EVERSE
Important:
changing direction.
Horn Button
International Models Only
The horn button is located on the control panel
6). Press the horn button to sound the horn.
Light Switch
The light switch is located to the left of the steering
column (Figure
the headlights. Push the light switch upward to turn on
g033923
the headlights or push downward to turn off the lights.
Battery-Discharge Indicator
The battery-discharge indicator is located to the left of
the steering column
indicator indicates the remaining charge in the
batteries. When the machine batteries are fully
(Figure
charged, ten indicator bars extend from the 0 to the
1 position. As the charge is used, the indicator bars
disappear starting at the right side of the meter. For
detailed information on the battery meter, refer to
Understanding and Using the Battery System (page
22).
Hour Meter
The hour meter is located to the right of the light
switch (Figure
total number of operating hours. The hour meter
starts to function whenever you turn the key switch to
the O position or if the machine is running.
N
g033924
Note:
When the machine is running, the hour meter
blinks continuously, recording usage.
USB Power Point
The USB power point is located to the left of the
parking-brake lever
to power mobile devices.
Important:
insert the rubber plug to prevent damage to the
power point.
16
, R , and N
ORWARD EVERSE
Always stop the machine before
6). Use the light switch to illuminate
(Figure 6). The battery-discharge
6). Use the hour meter to find out the
(Figure 6). Use the power point
When not using the USB power point,
(Figure
EUTRAL
and
ORWARD
(Figure