Table of Contents
Advertisement
Parameter
GUI element
GainL +/‐
GainR +/‐
Disable
Joint Limit
Free
Motion
Lock
Buttons
Reset
Params
6.7.3.2. Parameter control monitoring
The therapist can monitor the control parameters and assist torque.
SAIT‐IFU‐GEMS‐H Rev.1.1 (2019‐11)
Adjust assist strength of left leg only.
Adjust assist strength of right leg only.
Turn off joint limit monitor (extension 40 degree ~ flexion 100
degree) which is used for safety functions.
The device gives no assistive force, and moves itself just enough to
follow the patient as the patient moves.
Disable all buttons to prevent accidental button presses.
Reset all assist parameters back to initial values of the START point.
Function
Page 50 of 79
Advertisement
Table of Contents
