Selecting An Installation Site - Mitsubishi Electric AG-150A Installation Manual

5 Selecting an Installation Site

1. Required installation space
Install the Mounting attachment A type (PAC-YG85KTB) where the space indicated in the figure below can be secured.
6 Installation
The cable can be routed either from the top or the bottom.
1. To route the cable from the top
(1) Remove the cover of Mounting attachment A type.
To remove the cover, unscrew the two screws at the bottom of the cover, slide down the cover slightly, and pull it forward.
1 Unscrew the two screws.
30 (1-
299 (11-
151 (6)
3 /4
399(15- )
121 (4-
- 4 -
Mounting attachment A type (PAC-YG85KTB)
3
/ )
16
13 /16
)
3
30 (1- /
16
13 /16
)
2 Slide down the cover.
3 Pull the cover forward.
)
Unit: mm (in)