Mitsubishi Electric AG-150A Installation Manual page 6

(5) Push the cable through the knockout hole.
(6) Install the power supply unit (PAC-SC51KUA; sold separately) inside the Mounting attachment A type with the four M4 screws
(supplied).
(7) Connect the cables to the power supply unit (PAC-SC51KUA). Refer to the PAC-SC51KUA Installation Manual for details.
(8) Remove AG-150A surface cover.
knockout hole
Wall
M-NET transmission cable
- 6 -
Protective earth (ground) cable
AC power cable
Power supply unit
(PAC-SC51KUA;
sold separately)
(weight 1.4kg)
M4 screws (supplied
with PAC-YG85KTB)
Insert a flat-tip screwdriver in the holes
indicated and move the handle up to
remove the cover.