Mitsubishi Electric AG-150A Installation Manual page 5

(2) Cut out the knockout hole on the Mounting attachment A type (PAC-YG85KTB) at the top with a nipper for the cable
(the thin part of the plastic).
(3) Sand the cut surface of the knockout hole smooth.
CAUTION
Any rough edges that are left may damage the cable and cause electric shock or fire.
(4) Install the Mounting attachment A type (PAC-YG85KTB) with
the six mounting screws (field-supplied).
Use screws that are suitable for the wall type.
Install it on the surface strong enough to support its weight.
NOTE
Install the Mounting attachment A type (PAC-YG85KTB)
so that the arrow ( UP) on the back of it points up.
NOTE
Install the Mounting attachment A type (PAC-YG85KTB)
so that the arrow ( UP) on the back of it points up.
Wall
- 5 -
UP
>PC+ABS<
M5 screws (field-supplied)